water-based release agent

KG-L2 is a new environmentally friendly water-based release agent developed for concrete piles, electric poles and other products. It has a high cost-effectiveness. The release agent can smoothly separate the concrete from the mold when removing the mold, keeping the concrete shape intact and the mold intact. The bubbles on the surface of the concrete product after demolding are almost zero, and the feel is delicate. It is the first choice for high-quality cement product projects.

Performance indicators:

Appearance: yellow-white liquid

Scope of application: suitable for steel formwork concrete pipe piles, electric poles and other products

Ingredients: modified polymer, isolation agent, surfactant

PH: 7.5-10

Apply area: 10-15 square meters/KG can be applied after dilution with water

Water stability: evenly dispersed after dilution, no obvious stratification 4 hours after dilution

Storage method: must be stored in a cool place, not exposed to sunlight or rain, shelf life 9 months

Instructions for use: dilute with tap water, the dilution multiple is 8 to 12 times, the temperature is below 15 degrees Celsius or there is sticky skin, dilute with water 6 to 8 times, do a small test before dilution, and then determine the dilution ratio. When diluting with water, first add a small amount of water (about 2 times) to the release agent, stir and soak slightly, wait for the water-based release agent to completely dissolve in the water, then add the remaining water, and stir evenly while adding water. To maintain the best effect, stir the release agent evenly every 4 hours after adding water before spraying.